29mm Sash Window Finger Lift Ring Satin Nickel

1.3/16" Inch Lacquered Brushed Satin Nickel Sliding Sash Window Pull Ring

This premium UK quality sash pull ring from the Heritage collection in a superior lacquered brushed satin nickel finish that provides a warm silver finish when compared to standard satin chrome. This surface mount window ring pull will assist with the opening and closing of traditional sliding sash windows.

This sash window ring pull is 11mm wide, 29mm overall in diameter with a 25mm inner diameter. The mounting plate measures 43mm long by 17mm wide, with 31mm screw centres. The overall height is 34mm. Installation is surface mounted and easily fitted to timber windows with 2 colour matched conventional slot head screws for an authentic traditional look. We supply these ring pulls in single units fixings.

Sash window rings can be fitted to both top and bottom sashes, if fitted to the top sash rail the top window can be close by lifting the bottom window or using a pole hook, very handy on taller windows.

• PRO TIP: To ensure the best aesthetics and operation on wider windows, divide the sash rail by four and fit two pulls at the left and right divide, the distance between the two pulls will be twice that from the side. Ensure the pulls are not fitted to low on the frame. Use the spare hardened steel screw to ensure the drilled pilot holes will accept the brass screws with out deforming the heads (especially important in aged timber, oak, and other hardwood windows).