4" CE13 Ball Bearing Hinge Black Enamel Finish

This CE marked Grade 13 ball bearing hinge features a black enamel finish and is suitable for standard doors & fire doors with a combined mass of up to 120kg. This fire door hinge is suitable for both FD30 & FD60 fire doors.

This 102mm ball bearing hinge is CE marked and tested to BS EN 1935 and manufactured from 3mm thick stainless steel and measures 4"(102mm) long by 3"(76mm) wide when fully open and featuring a black enamel finish.

This 4" ball bearing hinge is supplied in single units complete with matching black screws. This black hinge is suitable for internal applications only, four hinges should be fitted to heavy fire rated doors.

To extend the working life of this black ball bearing hinge an occasional clean with a spray polish is recommended. We would also advise that once a year hinges are treated with a WD40 type oil, this will also increase the lifetime of the hinge. After initial installation subsequent oiling there may be slight oil seepage which should be cleaned off immediately with a dry cloth.

In order to fully comply with BS EN 1935 it is recommended that when this ball bearing hinge is fitted to a fire door it should be bedded on a 2mm intumescent pad.