24" Heavy Duty Straight Crook & Band Hinge Zinc Plated

This 24 inch lift off straight strap hinge is a heavy-duty pattern 1055 nickel plated steel hinge ideal for garage doors, gates, outbuilding doors, and utility doors. The zinc plate finish will help prevent corrosion, and can be over-painted using an etching primer if required.

Hook and Band Dimensions

This hook & band hinge is manufactured from 5mm thick by 48mm (1.7/8") wide sturdy steel. It has an overall length of 62cm and is approximately 24 inches to the centre of the locating socket. The hook features a 15.5mm (5/8") diameter gudgeon pin with a projection of 50mm. The backplate is 48mm x 165mm long.

Straight Band Installation Information

The straight band, when mounted on the gudgeon pin, will have an overall length of 62cm, and will be projected 16mm (5/8") from the mounting position on the gate post or frame. If all the mounting pins are fitted pointing upwards, the gate/door can be lifted off when open. Installing with one pin pointing downwards will prevent removal.

Sizes are approximate and subject to manufacturing tolerances. They are an average of the stock we measured and can change without notice. If any measurement is vital please contact us so we can check against our current inventory.

This 24 inch band and gudgeon hinge is supplied in single units and will require suitable fixings such as:
• 100mm Coach-bolt and screws.